9-22
In case of emergency/Rear gate – if the rear gate cannot be opened
not turn the push-button ignition
switch to the “ACC” status, perform
the procedure described in “Switching
power status” F9-23.
Rear gate – if the rear gate
cannot be opened
In the event that you cannot open the rear
gate by operating the rear gate opener
button, you can open it from inside the
cargo area.
3. To open the rear gate, turn the lever to
the right position using a flat-head screwdriver or a similar tool.
1. Remove the access cover at the
bottom-center of the rear gate trim.
2. Locate the rear gate open lever behind
the rear gate trim panel.
CAUTION
Never operate the rear gate open
lever with fingers because doing so
may cause an injury. Always use a
flat-head screwdriver or a similar
tool.