9-12
In case of emergency/In case of a flat tire
compressor’s power switch (1), wait a
few seconds, and then press the “ ” (off)
side of the switch.
28. If the tire pressure is 18 psi (130 kPa)
or more, adjust the tire to the specified
pressure on the tire placard.
If the tire pressure is less than 18 psi (130
kPa), the tire cannot be repaired with
sealant. Do not continue to drive your
vehicle. Contact a SUBARU dealer or
Commercial Road Service for assistance.
NOTE
25. Insert the power cord of the compressor (3) into the accessory power outlet
(10).
26. Set the ignition switch to the “ACC”
position.
In cold weather, more time might be
required to complete a repair, and you
might need to drive a longer distance.
In this case, repeat the Steps from (19)
to (26). If the pressure continues to
drop even after repeating this procedure, the tire cannot be repaired with
the repair kit. Do not continue to drive
the car. Contact a SUBARU dealer or
Commercial Road Service for assistance.
29. After sealing the flat tire, immediately
have your vehicle inspected at a 5T$%P