In case of emergency/In case of a flat tire
CAUTION
. Park your vehicle in a safe location on a flat, hard surface.
. The flat tire repair kit is designed
only for tires of the specified tires
of a non-specified size or other
purposes. For the specified tire
size, refer to the tire placard
located on the driver’s door pillar.
. Store the flat tire repair kit only in
its original location, locked into
place by the locking plate. Otherwise, it could fly out if the brakes
are applied suddenly, resulting in
unexpected injury.
! How to seal a tire
Remove the compressor from the case
before use and place it on a flat surface
near the tire.
9-7
2. Remove the hose (2) and power cable
(3) from the back of the compressor.
3. Shake the sealant bottle (4) well, and
then remove the cap (5).
1. Make sure the compressor power
switch (1) is in the “ ” (off) position.
CAUTION
One bottle of sealant is sufficient for
only one tire. Do not re-use sealant.
NOTE
When working in temperatures below
the freezing point, it is recommended
that you keep the bottle warm inside
the vehicle before using the sealant.
– CONTINUED –