11-44
Maintenance and service
& High-mounted stop light
(4-door)
1)
1)
Trunk light
1. Open the trunk and locate the electrical connector of the high-mounted stop
light that is wired near the trunk light by
referring to the illustration.
2. Disconnect the electrical connector by
unlocking its retainer using a flat-head
screwdriver. Then, enter the rear cabin.
Mount assembly
3. While pushing the mount assembly
rearward by hand, lift up the front end of
the mount assembly to remove it. At this
time, be careful not to allow your hand to
slip off the mount assembly.
1)
2)
Retainer
Locking lug
4. Undo the two retainers and slide the
light assembly to release the locking lug.
1)
Lens