Maintenance and service
Engine hood
11-5
To close the hood:
1. Lift the hood slightly and remove the
hood prop from the slot in the hood and
return the prop to its retainer.
2. Lower the hood to a height of approximately 5.9 in (15 cm) above its closed
position and then let it drop.
3. After closing the hood, be sure the
hood is securely locked.
To open the hood:
1. If the wiper blades are lifted off the
windshield, return them to their original
position.
3. Release the secondary hood release
by moving the lever between the front
grille and the hood toward the left.
If this does not close the hood, release it
from a slightly higher position. Do not push
the hood forcibly to close it. It could
deform the metal.
WARNING
Always check that the hood is
properly locked before you start
driving. If it is not, it might fly open
while the vehicle is moving and
block your view, which may cause
an accident and serious bodily injury.
2. Pull the hood release knob under the
instrument panel.
4. Lift up the hood, release the hood prop
from its retainer and put the end of the
hood prop into the slot in the hood.