8-18
Driving tips
wire harness by individually activating the
brake, stop and turn signal lights on the
trailer.
NOTE
Always disconnect the trailer wire harness before launching or retrieving a
watercraft.
& When not towing a trailer
. Remove the ball mount from the hitch
receiver tube and insert the receiver cover
onto the hitch receiver tube.
. Place the dust cap over the four-pin
connector of the hitch wire harness to
protect against possible damage.
. Occasionally lubricate terminals of the
four-pin connector using terminal grease.
Trailer towing (XV CROSSTREK models)
CAUTION
This “Trailer towing” section is
applicable for XV CROSSTREK
models. Other