BRZ _ U. book 343 ページ 2024 年 6 月 14 日 金曜日 午前 9 時 14 分
�
Use only engine oil with the recommended grade and viscosity.
Be careful not to spill engine oil when adding it. If oil touches the exhaust pipe, it may cause a bad smell, smoke, and / or a fire. If engine oil gets on the exhaust pipe, be sure to wipe it off.
B02098
1) |
Full level |
2) |
Low level |
3) |
Approximately 1.1 US qt( 1.0 liter, 0.9 |
Imp qt) from low level to full level |
4. Pull out the oil level gauge again.
5. Check the oil levels on both sides of the level gauge. The engine oil level must be judged by the lowest of the two levels. If the oil level is below the low level mark, add oil so that the full level is reached.
CAUTION
� Be careful not to touch the engine oil filter when removing the oil filler cap. Doing so may result in a burn, a pinched finger, or may cause some other injury.
To add engine oil, remove the engine oil filler cap and slowly pour engine oil through the filler neck. After pouring oil into the engine, you must use the level gauge to confirm that the oil level is correct. NOTE
� To prevent overfilling the engine oil, do not add any additional oil above the full level when the engine is cold.
■ Changing the Oil and Oil Filter
Change the oil and oil filter according to the maintenance schedule in the“ Warranty and Maintenance Booklet”.