BRZ _ U. book 307 ページ 2024 年 6 月 14 日 金曜日 午前 9 時 14 分
▼ How to seal the flat tire To seal the flat tire, perform the following steps.
� First, pump in the sealant and air. Drive the vehicle for approximately 10 minutes or 3 miles( 5 km) so that the sealant can seal the damaged area.
� Stop the vehicle again, check and, if necessary, adjust the pressure of the damaged tire.
� After that, you can continue to drive carefully no faster than 50 mph( 80 km / h) and within the maximum distance of 125 miles( 200 km).
Inform all other users of the vehicle that the tire has been temporarily sealed with the flat tire repair kit and make them aware of the special driving conditions to be observed.
900898
1. Shake the sealant bottle well. Loosen the hose.
1
900884
1) Valve
2. Connect the air compressor hose to the valve on the bottle.