BRZ _ U. book 232 ページ 2024 年 6 月 14 日 金曜日 午前 9 時 14 分
232
Starting and Stopping Engine � On rare occasions, it may be difficult to start the engine depending on the fuel and the usage condition( repeated driving of a distance in which the engine has not warmed up sufficiently). In such a case, it is recommended that you change to a different brand of fuel. � On rare occasions, transient knocking may be heard from the engine when the accelerator is operated rapidly such as a rapid start-up and a rapid acceleration. This is not a malfunction. � The engine starts more easily when the headlights, air conditioner and rear window defogger are turned off. ■ Starting Engine
WARNING
� There are some general precautions when starting the engine. Carefully read the precautions described in " General Precautions When Starting Engine " �P231.
� If the steering lock cannot be released after the engine has started, never drive the vehicle. The steering is still locked, and it may result in an accident.
CAUTION
� If a system malfunction warning message is displayed on the combination meter, there may be a malfunction with the vehicle. Contact a SUBARU dealer immediately.
� If a steering lock warning message is displayed on the combination meter after the engine has started, it means that the steering is still locked. While moving the steering wheel right and left, depress the brake pedal, and press the push-button ignition switch.
� Do not continue pressing the push-button ignition switch for more than 10 seconds. Doing so could cause a malfunction. If the engine does not start, stop pressing the push-button ignition switch. Instead, press the pushbutton ignition switch without depressing the clutch pedal( MT models) or the brake pedal( AT models) to switch the power status to“ OFF”. Wait 10 seconds, and then press the push-button ignition switch to start the engine.
N
� ig c p
� th th w( M m
� n w s
� � th C