BRZ _ U. book 202 ページ 2024 年 6 月 14 日 金曜日 午前 9 時 14 分
202
Automatic Climate Control Operation 4-3. Automatic Climate Control Operation
When this mode is selected, the fan speed, airflow mode, air-inlet control, and air conditioner operation are automatically controlled. To activate this mode, perform the following.
1. Press the AUTO button. The FULL AUTO mode is selected and the“ FULL AUTO” indicator light on the display illuminates.
2. Set the preferred temperature using the temperature control dial.
NOTE
� Operate the automatic climate control system when the engine is running. � Even when cooling is not necessary, the air conditioner will automatically turn on if the temperature is set much lower than the current outlet air temperature. Even in this case, the“ A / C” indicator light on the control panel illuminates � The air conditioner may not operate in the following cases:- When the cabin temperature is low- When the ambient temperature decreases close to 32 ° F( 0 ° C)
� The controllable temperature range may vary depending on the regional specifications of the vehicle. � If you operate any of the buttons on the control panel other than the ON / OFF button, rear window defogger button, SYNC button and temperature control dial( s) during FULL AUTO mode operation, the“ FULL” indicator light on the control panel will turn off and the“ AUTO” indicator light will remain illuminated. You can then manually control the system as desired using the button you operated. To change the system back to the FULL AUTO mode, press the AUTO button.
To turn off the climate control system, press the ON / OFF button. Then the air inlet selection will be set to the following.
� When the air inlet selection is set to auto mode: Outside air circulation
� When the air inlet selection is set to manual mode: No change
When the ignition switch is changed to the“ OFF” or“ ACC” position from“ ON”, the air inlet mode will automatically change to the outside air mode regardless of whether it is the auto mode or manual mode.
■ T e a