BRZ _ U . book 192 ページ 2024 年 6 月 14 日 金曜日 午前 9 時 14 分
192
Mirrors 1 1 1 ) Indicator Light
304871
4 . Press the HomeLink ® button that you would like to program and observe the indicator light .
� If the indicator light remains constant green , your device should
operate when the HomeLink ® button is pressed . At this point , if your device operates , programming is complete . � If the indicator light rapidly flashes green , firmly press , hold for two
seconds and release the HomeLink ® button up to three times to complete the programming process . At this point if your device operates , programming is complete . If the device does not operate , continue with the next step of the programming instructions .
1 ) “ Learn ” button
304872
5 . At the garage door opener motor , ( security gate motor , etc .) locate the “ Learn ”, “ Smart ”, or “ Program ” button . This can usually be found where the hanging antenna wire is attached to the motor-head unit ( see the device ’ s manual to identify this button ). The name and color of the button may vary by manufacturer .
NOTE
A ladder and / or second person may simplify the following steps .
6 . Firmly press and release the “ Learn ”, “ Smart ”, or “ Program ” button . You now have 30 seconds in which to complete step 7 .
7 h
H th y
H re