BRZ _ U. book 178 ページ 2024 年 6 月 14 日 金曜日 午前 9 時 14 分
178
Light Control Switch ▼ Battery-saving function If the headlights or tail lights are illuminated when the push-button ignition switch is off, in order to prevent the battery from becoming discharged, the lights will automatically be turned off after approximately 20 minutes.
If a door is opened or closed, the battery saving function will temporarily be canceled and the lights will automatically be turned off after approximately 20 minutes. ▼ Auto-on / off wiper-linked headlights
While the light control switch is in the“ AUTO” position, the headlights will automatically turn on when the windshield wipers operate several times. The headlights will automatically turn off approximately 1 minute after the wiper stops.
The ON / OFF setting of this function can be changed by operating the combination meter display( color TFT) or the center information display. For details, refer to " Settings Display " �P160 or " Car settings " �P168. Also, the setting can be changed by a SUBARU dealer. Consult your SUBARU dealer for details.
▼ Welcome lighting function
The welcome lighting function turns on the low beam headlight for smooth approaching to or exiting from the vehicle at night or in a dark place.
The function is activated while all of the following conditions are met.
� The light control switch is in the“ AUTO” position
� It is dark enough to turn on the auto on / off headlights NOTE
If the engine is turned off after turning off the light switch, the welcome lighting function may not operate( for Canada models).
▽ When approaching
While the welcome lighting function is activated, the low beam headlights will automatically illuminate when unlocking the doors by using the remote keyless entry system.
The low beam headlights will remain illuminated for 30 seconds * 1 and then turn off. However, if any of the following operations is done, the low beam headlights will turn off.
� The ignition switch is turned to the“ ON” position.
� The doors are locked.
� The light control switch is turned to a position other than“ AUTO”.
W v il ig s
T u
� d
� p
� tw p p tw
* 1