BRZ _ U. book 105 ページ 2024 年 6 月 14 日 金曜日 午前 9 時 14 分
Keyless � Open a door and then close it
� Turn the push-button ignition switch to the“ ON” position ■ Power Saving Function of Access Key Fob
This function stops the access key fob from receiving signals and helps minimize the battery consumption of the access key fob.
1. Press the“” button twice while holding the“” button.
1 and push-button start system will not be available. To cancel the power save mode, press one of the buttons on the access key fob. ■ Disabling Keyless Access Function
WARNING
If you have an implanted pacemaker or an implanted defibrillator, perform the procedure " By operating the driver’ s door " �P106 to disable the keyless access function. If you perform the procedure " By operating the access key fob " �P105, the operation of an implanted pacemaker or implanted defibrillator may be affected by the radio waves from the transmitter antenna.
1) LED indicator
202501
2. Confirm that the LED indicator blinks 4 times to notify that the setting is complete.
When the access key fob is in the power save mode, the keyless access function
When the vehicle is not going to be used for a long time, or when you choose not to use the keyless access function, the keyless access function can be disabled.
NOTE
� If the access key is kept in or comes near the vehicle, the system becomes active and both the vehicle and access key batteries’ energy will be consumed. If this occurs frequently or