BRZ _ U. book 101 ページ 2024 年 6 月 14 日 金曜日 午前 9 時 14 分
Keyless �
Unlock the trunk lid NOTE
� It is not possible to lock the doors and fuel filler lid using the keyless access function when the push-button ignition switch is in the“ ACC” or“ ON” position. Refer to " Switching Power Status " �P129. � If the door handle is gripped with a gloved hand, the door lock may not be released. � If the door lock sensor is touched four times or more repeatedly, the system will ignore the sensor operation. � When performing the locking procedure too quickly, locking may not complete. � If any of the doors are not fully closed, an electronic chirp sounds 5 seconds to alert you that the doors are not properly closed. � It is possible to lock a closed door even if the other door is open. After performing the locking procedure, close the opened door to lock it. � Within 3 seconds after locking the doors using the keyless access function, it is not possible to unlock doors using the keyless access function.
� When locking, be sure to carry the access key fob to prevent locking the access key fob in the vehicle. � The setting of the hazard warning flasher operation and the volume of the audible signal can be changed by your SUBARU dealer. Contact your SUBARU dealer for details. The setting of the hazard warning flasher operation can be changed by operating the center information display. For details, refer to " Car settings " �P168. ▽ Locking with the door lock sensor 1
1) Door lock sensor
204128
Carry the access key fob, close all doors and touch the door lock sensor on the door handle. All doors including the fuel