BRZ _ U . book 340 ページ 2023 年 8 月 15 日 火曜日 午前 10 時 6 分
340
Engine
Hood
3 . Release the secondary hood lock by moving the lever between the front grille and the hood toward the left .
1
If this does not close the hood , release it from a slightly higher position .
WARNING
Always check that the hood is properly locked before you start driving . If it is not , it might fly open while the vehicle is moving and block your view , which may cause an accident and serious bodily injury .
B02432
1 ) Grip
4 . Lift up the hood , release the hood prop from its retainer and put the end of the hood prop into the slot in the hood . Hold the grip for handling the hood prop .
To close the hood :
1 . Lift the hood slightly and remove the hood prop from the slot in the hood and return the prop to its retainer .
2 . Lower the hood to a height of approximately 7.8 to 11.8 in ( 20 to 30 cm ) above its closed position and then let it drop .
3 . After closing the hood , be sure the hood is securely locked .