BRZ _ U . book 103 ページ 2023 年 8 月 15 日 火曜日 午前 10 時 6 分
Keyless � Open a door and then close it
� Turn the push-button ignition switch to the “ ON ” position ■ Power Saving Function of Access Key Fob
This function stops the access key fob from receiving signals and helps minimize the battery consumption of the access key fob .
1 . Press the “ ” button twice while holding the “ ” button .
1 and push-button start system will not be available . To cancel the power save mode , press one of the buttons on the access key fob . ■ Disabling Keyless Access Function
WARNING
If you have an implanted pacemaker or an implanted defibrillator , perform the procedure " By operating the driver ’ s door " �P104 to disable the keyless access function . If you perform the procedure " By operating the access key fob " �P103 , the operation of an implanted pacemaker or implanted defibrillator may be affected by the radio waves from the transmitter antenna .
1 ) LED indicator
202501
2 . Confirm that the LED indicator blinks 4 times to notify that the setting is complete .
When the access key fob is in the power save mode , the keyless access function
When the vehicle is not going to be used for a long time , or when you choose not to use the keyless access function , the keyless access function can be disabled .
NOTE
� If the access key is kept in or comes near the vehicle , the system becomes active and both the vehicle and access key batteries ’ energy will be consumed . If this occurs frequently or