BRZ _ U . book 97 ページ 2023 年 8 月 15 日 火曜日 午前 10 時 6 分
Keyless - When operating near a facility where strong radio waves are transmitted , such as a broadcast station and power transmission lines . - When products that transmit radio waves are used , such as an access key fob or a remote transmitter key of another vehicle . - When carrying the access key fob of your vehicle together with the access key fob or the remote transmitter of another vehicle . - When the access key fob is placed near wireless communication equipment such as a cell phone . - When the access key fob is placed near a metallic object . - When metallic accessories are attached to the access key fob . - When carrying the access key fob with an electronic appliance such as a laptop computer . - When the battery of the access key fob is discharged . � The access key fob is always communicating with the vehicle and is continuously using the battery . Although the life of the battery varies depending on the operating conditions , it is approximately 1 to 2 years . If the battery becomes fully discharged , replace it with a new one . � If an access key fob is lost , it is recommended that all of the remaining access key fobs be reregistered . For reregistration of an access key fob , contact a SUBARU dealer . � For a spare access key fob , contact a SUBARU dealer . � Up to 7 access key fobs can be registered for one vehicle . � Do not leave the access key fob in the storage spaces inside the vehicle , such as the door pocket , dashboard or inside the corner of the trunk . Vibrations may damage the access key fob or turn on the switch , possibly resulting in a lockout . � After the vehicle battery is discharged or replaced , initialization of the steering lock system may be required to start the engine . In this case , perform the following procedure to initialize the steering lock . ( 1 ) Turn the push-button ignition switch to the “ OFF ” position . For details , refer to " Switching Power Status " �P125 . ( 2 ) Open and close the driver ’ s door . ( 3 ) Wait for approximately 10 seconds .
When the steering is locked , the initialization is completed .
� Do not leave the access key fob in the following places .