BRZ _ U . book 347 ページ 2022 年 3 月 29 日 火曜日 午後 3 時 59 分
�
Use only engine oil with the recommended grade and viscosity .
Be careful not to spill engine oil when adding it . If oil touches the exhaust pipe , it may cause a bad smell , smoke , and / or a fire . If engine oil gets on the exhaust pipe , be sure to wipe it off .
1 ) |
Full level |
2 ) |
Low level |
3 ) |
Approximately 1.1 US qt ( 1.0 liter , 0.9 |
Imp qt ) from low level to full level |
4 . Pull out the oil level gauge again .
5 . Check the oil levels on both sides of the level gauge . The engine oil level must be judged by the lowest of the two levels . If the oil level is below the low level mark , add oil so that the full level is reached .
�
CAUTION
B02098
Be careful not to touch the engine oil filter when removing the oil filler cap . Doing so may result in a burn , a pinched finger , or may cause some other injury .
To add engine oil , remove the engine oil filler cap and slowly pour engine oil through the filler neck . After pouring oil into the engine , you must use the level gauge to confirm that the oil level is correct . NOTE
� To prevent overfilling the engine oil , do not add any additional oil above the full level when the engine is cold .
■ Changing the Oil and Oil Filter
Change the oil and oil filter according to the maintenance schedule in the “ Warranty and Maintenance Booklet ”.