BRZ _ U . book 103 ページ 2022 年 3 月 29 日 火曜日 午後 3 時 59 分
Keyless � Open a door and then close it
� Turn the push-button ignition switch to the “ ON ” position ■ Power Saving Function of Access Key Fob
This function stops the access key fob from receiving signals and helps minimize the battery consumption of the access key fob .
1 . Press the “ ” button twice while holding the “ ” button .
1 and push-button start system will not be available . To cancel the power save mode , press one of the buttons on the access key fob . ■ Disabling Keyless Access Function
WARNING
If you have an implanted pacemaker or an implanted defibrillator , perform the procedure " By operating the driver ’ s door " �P104 to disable the keyless access function . If you perform the procedure " By operating the access key fob " �P103 , the operation of an implanted pacemaker or implanted defibrillator may be affected by the radio waves from the transmitter antenna .
1 ) LED indicator
202501
2 . Confirm that the LED indicator blinks 4 times to notify that the setting is complete .
When the access key fob is in the power save mode , the keyless access function
When the vehicle is not going to be used for a long time , or when you choose not to use the keyless access function , the keyless access function can be disabled .
NOTE
� The locking and unlocking function by the remote keyless entry system is not disabled . � To start the engine while the functions are disabled , perform the proce-