Conventional Cruise Control
■ Restoring the previously set vehicle speed
The previously set vehicle speed is stored in memory . To restore that vehicle speed , push the cruise control switch to the “+ RES ” side . ( Conventional Cruise Control indicator ) changes from white to green . You can restore the set vehicle speed when the previously set vehicle speed has been stored and the current vehicle speed is approximately 20 mph ( 30 km / h ) or more .
Green
S04130 H00038
NOTE
• The vehicle speed stored in memory is erased in the following circumstances : - The cruise control is turned off by pressing the ON-OFF switch . - TRAC system or Vehicle Stability Control ( VSC ) is activated . - The cruise control mode was switched from Conventional Cruise Control to
Adaptive Cruise Control .
• The vehicle drives constantly and correspondingly to the set vehicle speed between 20 mph ( 30 km / h ) and 90 mph ( 145 km / h )*. *: For Mexico models , 30 km / h and 200 km / h .
• If there is no vehicle speed stored in memory ( previous vehicle speed ), the current vehicle speed is set when the cruise control switch is pushed to the “+ RES ” side .
� Page 85
92