Conventional Cruise Control
●Automatic cancellation by the system In the following cases , a notification sounds 1 short beep and 1 long beep and the cruise control function is automatically canceled .
( Conventional Cruise Control indicator ) changes from green to white . Also , the Conventional Cruise Control cancellation message is displayed on the screen . After the conditions listed below have been resolved , perform the cruise control set operation again to reactivate cruise control .
S04171
• The select lever is moved to a position other than “ D ” or “ M ”. - Conventional Cruise Control can be resumed after the select lever is returned to the “ D ” or “ M ” position .
• Vehicle speed drops to approximately 16 mph ( 25 km / h ) or less ( due to a steep uphill grade or some other reason ).
• Vehicle speed increases to approximately 100 mph ( 160 km / h )* or more . *: For Mexico models , 220 km / h .
• TRAC system or Vehicle Stability Control ( VSC ) is activated .
• Either the driver ’ s door or the front passenger ’ s door is opened .
• The driver ’ s seatbelt is unfastened .
• The EyeSight system has a malfunction . ( EyeSight warning indicator : Yellow )
� Page 96
• The steering wheel is turned significantly in either direction .
• The grade of the road is steep .
• The Pre-Collision secondary braking is activated .
• Parking brake is applied .
• The engine revolutions approached the red zone .
• The driving mode is set to snow mode .
� Refer to the vehicle Owner ’ s Manual for details .
• Pre-Collision Braking System is turned off during TRACK mode .
� Refer to the vehicle Owner ’ s Manual for details .
• TRAC system and Vehicle Stability Control ( VSC ) are off .
� Refer to the vehicle Owner ’ s Manual for details .
• The driving wheels spin on a slippery road .
90