Adaptive Cruise Control
NOTE
• The set vehicle speed can be set between 20 mph ( 30 km / h ) and 90 mph ( 145 km / h )*. *: For Mexico models , 30 km / h and 180 km / h .
• If the vehicle speed is approximately 20 mph ( 30 km / h ) or less when the vehicle speed is set , the set vehicle speed is set to 20 mph ( 30 km / h ).
• When driving on a curve , the vehicle may not accelerate , or may decelerate , even if the set vehicle speed is higher than the current vehicle speed .
• If ( Adaptive Cruise Control indicator ) does not illuminate even when the ON-OFF switch is pressed , Adaptive Cruise Control will not operate .
• If ( Adaptive Cruise Control indicator ) does not illuminate even when the ON-OFF switch is pressed and this occurs frequently , there may be a malfunction in the system . Contact a SUBARU dealer and have the system inspected .
When a vehicle in front is detected , a notification sounds 1 short beep and the lead vehicle indicator will illuminate . The vehicle follows the lead vehicle in front and maintains the selected following distance . At this time , the cruise speed is adjusted to and will not exceed the set vehicle speed . If the vehicle in front is no longer detected , a notification sounds 1 short beep and the lead vehicle indicator turns off . While the driver accelerates the vehicle by depressing the accelerator pedal , ( Adaptive Cruise Control indicator ) will turn from green to white . When acceleration has stopped , ( Adaptive Cruise Control indicator ) will turn from white to green .
NOTE
Lead vehicle indicator ( icon )
Lead vehicle indicator
• When the meter information screen is set to display content other than the EyeSight screen , the lead vehicle indicator is shown as an icon .
� Refer to the vehicle Owner ’ s Manual for details .
• The notification sound ( lead vehicle acquisition sound ) that occurs when a vehicle in front is detected or no longer detected while Adaptive Cruise Control is activated can be turned off by customization .
� Page 100
H00035
49