2-1. Driving procedures
Push-button ignition switch (vehicles with a keyless access with push button start system)
Performing the following operations when carrying the access key
on your person starts the engine or changes push-button ignition
switch modes.
■ Starting the engine
Vehicles with an automatic transmission
STEP 1
Check that the parking brake is set.
STEP 2
Check that the select lever is set in P.
2
If the select lever is not set in P, the engine may not be started.
(oP. 181)
Firmly depress the brake pedal.
The keyless access with push button start system indicator light
(green) will turn on. If the indicator light does not turn on, the
engine cannot be started.
STEP 4
Press the push-button ignition
switch shortly and firmly.
When operating the push-button ignition switch, one short,
firm press is enough. It is not
necessary to press and hold
the switch.
The engine will crank until it
starts or for up to 10 seconds,
whichever is less.
Continue depressing the brake
pedal until the engine is completely started.
The engine can be started
from any push-button ignition
switch mode.
169
When driving
STEP 3