1-6. Security system
I Deactivating or stopping the alarm
Perform one of the following to deactivate or stop the alarm:
G Unlock the doors using the “keyless access” entry function.
1
G Unlock the doors using the remote keyless entry system.
Before driving
G Turn the push-button ignition switch to “ACC” or “ON” mode,
or start the engine. (The alarm will be deactivated or stopped
after a few seconds.)
Activating/deactivating the alarm system
STEP 1
Check that both side doors and the trunk lid are closed.
STEP 2
Turn the push-button ignition switch to “ON” mode.
Open the driver’s door while
pressing and holding
on
the power door lock switch and
continue to press
for
approximately 10 seconds after
the driver’s door has opened.
STEP 3
The alarm system changes
between activated and deactivated as follows.
Alarm status
Horn
Multi-information display
Deactivated
Sounds twice
AL oF
Ac