1-4. Opening and closing the windows
I When the power window does not close normally
If the jam protection function is operating abnormally and a window cannot
be closed, close all the doors perform the following operations using the
power window switch on the relevant door.
STEP 1 Vehicles without a keyless access with push button start system:
After stopping the vehicle, the engine switch is turned to the “ON”
position.
Vehicles with a keyless access with push button start system: After
stopping the vehicle, the push-button ignition switch is turned to
“ON” mode.
STEP 2 Hold the power window switch in the one-touch closing position two
consecutive times.
STEP 3 Hold the power window switch in the one-touch closing position
once again and continue holding for 1 second or more after the window closes completely.
If you push the power window switch to the opening position while the window is moving, start again from the beginning. If the window continues to
close but then re-open slightly even after performing the above procedure
correctly, we recommend that you have your SUBARU dealer.
WARNING
I Closing the windows
Observe the following precautions.
Failure to do so may result in death or serious injury.
G Check to make sure that all passengers do not have any part of their body
in a position where it could be caught when a window is being operated.
G Do not allow children to operate the power windows.
Closing a power window on someone can cause serious injury, and in
some instances, even death.
I Jam protection function
G Never use any part of your body to intentionally activate the jam protection
function.
G The jam protection function may not work if something gets caught just
before the window fully closes.
72