2-4. Using other driving systems
I Turning off both TRAC and Vehicle stability control (VSC) systems
To turn the TRAC and Vehicle stability control (VSC) systems off, press and
hold
for more than 3 seconds while the vehicle is stopped.
The Traction Control System OFF indicator light and the Vehicle stability
control (VSC) off indicator light will come on.
Press the button again to turn the systems back on.
2
I Sounds and vibrations caused by the ABS, brake assist, TRAC and
Vehicle stability control (VSC) systems
G Any of the following conditions may occur when the above systems are
operating. None of these indicates that a malfunction has occurred.
•
•
•
•
Vibrations may be felt through the vehicle body and steering.
A motor sound may be heard after the vehicle comes to a stop.
The brake pedal may pulsate slightly after the ABS is activated.
The brake pedal may move down slightly after the ABS is activated.
I Electric power steering operation sound
When the steering wheel is operated, a motor sound (whirring sound) may
be heard. This does not indicate a malfunction.
I Automatic reactivation of TRAC and Vehicle stability control (VSC) systems
After turning the TRAC and Vehicle stability control (VSC) systems off, the
systems will be automatically reactivated in the following situations:
G Vehicles without a keyless access with push button start system: When
the engine switch is turned to “LOCK” position
G Vehicles with a keyless access with push button start system: When the
push-button ignition switch is turned off
G If only the TRAC system is turned off, the TRAC will turn on when vehicle
speed is more than ap