62
Seatbelts
1 . Push the release button of the center seatbelt buckle ( on the left-hand side ) to unfasten the seatbelt .
NOTE
When the seatback is folded down , it is necessary to disconnect the connector .
2 . Insert a tongue plate or another hard pointed object into the slot in the anchor buckle on the right-hand side and push it in . The anchor tongue plate will then disconnect from the buckle .
3 . With the belt held by hand , allow the retractor to roll up the belt slowly . You should hold the webbing end and guide it back into the retractor while it is rolling up . Neatly store the tongue plate in the recess on the ceiling and then insert the tongue plate and anchor tongue plate into the slot as shown in the illustration .
CAUTION
. Do not allow the retractor to roll up the seatbelt too quickly . Otherwise , the metal tongue plates may hit against the trim , resulting in damaged trim .
. Have the seatbelt fully rolled up so that the tongue plates are neatly stored . A hanging tongue plate can swing and hit against the trim during driving , causing damage to the trim .