Seatbelts 57 |
|||||||
|
3. Pick up the tongue plate and pull the belt out slowly. Do not let it get twisted.. If the belt stops before reaching the buckle, return the belt slightly and pull it out more slowly.
. If the belt still cannot be unlocked, let the belt retract slightly after giving it a strong pull, then pull it out slowly again.
|
5. To tighten the lap part, pull up on the shoulder belt.
6. Place the lap belt as low as possible on the hips, not on the waist.
|
! Adjusting the front seat shoulder belt anchor height
S01AE060101
|
The shoulder belt anchor height should be adjusted to the position best suited for the driver / front passenger. Always adjust the anchor height so that the shoulder belt passes over the middle of the shoulder without touching the neck. |
Seat, seatbelt and SRS airbags |
|||
4. Insert the tongue plate into the buckle until you hear a click. |
To raise:
Pull the release knob and slide the anchor up.
To lower:
Pull the release knob and slide the anchor down.
|
||||||
Pull down on the anchor to make sure that it is locked in place. |
|||||||
– CONTINUED – |