Subaru Ascent Manuals 2025 Ascent Owner's Manual | Page 59

Seat ventilation 53
Second-row seat heater switch 1 Right side 2 Indicator lights 3 Left side
Press the second-row seat heater switch. Each time you press the switch, the mode will change as follows.
even if the vehicle has restarted. The second-row seat switch will reset.
1-3. Seat ventilation( if equipped)
S01AR
The seat ventilation are equipped in the front seats.
The seat ventilation operate when the ignition switch is in the“ ON” position.
CAUTION
. Do not put hard or heavy objects or ones with protrusions on the seat, and do not stab the seat with sharp objects, such as pins or needles.
. When cleaning the seat, do not use organic solvents, such as thinner, benzene, or alcohol.
. If water or liquid is spilled on the seat, wipe it off with a dry cloth immediately.
Seat, seatbelt and SRS airbags
2 indicator lights are illuminated in HIGH mode, and 1 indicator light is illuminated in LOW mode. All indicator lights turn off when the heater is switched OFF.
NOTE
Only the front seat heater switches retain the previous switch position
NOTE
. Use of the seat ventilation for a long period of time while the engine is not running can cause battery discharge.
. The seat ventilation function cannot be used simultaneously with the front seat heater.
– CONTINUED –