|
3. Remove the bulb from the headlight assembly by turning it counterclockwise.
4. Replace the bulb with a new one. At this time, use care not to touch the bulb surface.
5. To install the bulb to the headlight assembly, turn it clockwise until it clicks.
6. Install the air intake duct with clips( right-hand side).
7. Set the washer tank to the original place and secure it with a clip( lefthand side).
|
1. Remove the covers. |
3. Slide the rear combination light assembly rearward and remove it from the vehicle.
4. Disconnect the electrical connector.
|
Maintenance and service |
|||||
2. Using a Phillips screwdriver, remove the upper and lower screws that secure the rear combination light as- |
||||||||
– CONTINUED – |