478
Maintenance precautions
tempt to take its connectors apart, as that may activate the system or it can render it inoperative. NEVER use a circuit tester for these wiring. If your SRS airbag or seatbelt pretensioner needs service, consult your nearest SUBARU dealer.
. Check the inside of the engine compartment to see if there are any cloths and tools left. If they are left inside, they may be a cause of malfunction and fire.
NOTE
SUBARU does not endorse the use of non-SUBARU approved flushing systems and strongly advises against performing these services on a SUBARU vehicle. Non-SUBARU approved flushing systems use chemicals and / or solvents which have not been tested or approved by SUBARU. SUBARU warranties do not cover any part of the vehicle which is damaged by adding or applying chemicals and / or solvents other than those approved or recommended by SUBARU.
& Before checking or servicing in the engine compartment
S11AB01
WARNING
. Always stop the engine and apply the parking brake firmly to prevent the vehicle from moving.
. Always let the engine cool down. Engine parts become very hot when the engine is running and remain hot for some time after the engine has stopped.
. Do not spill engine oil, engine coolant, brake fluid or any other fluid on hot engine components. This may cause a fire.
. When the ignition switch is in the“ ON” position, the cooling fan may operate suddenly even when the engine is stopped. If your body or clothes come into contact with a rotating fan, that could result in serious injury. To avoid risk of injury, always turn the push-button ignition switch to the“ OFF” position and confirm that the operation indicator on the switch is turned off. Then take the access key fob out from the vehicle.
. Before performing any servicing on a vehicle equipped with a remote engine start system( a dealer option), temporarily place the remote engine start system in service mode to prevent it from unexpectedly starting the engine.
& When checking or servicing in the engine compartment
S11AB03
CAUTION
. Do not contact the drive belt cover while checking the components in the engine compartment. Doing so may cause your hand to slip off the cover and result in an