40
Seats
1 . Turn the ignition switch to the “ ON ” position .
2 . Put the select lever is in the “ P ” position and apply the parking brake . Then press button “ 1 ” or “ 2 ”.
A chirp will sound and the seat and angle of the outside mirrors moves to the registered position .
When the select lever is moved to the “ R ” position , the outside mirror will move to the registered reverse tilt-down position .
NOTE
. If the vehicle battery is removed , the registered memory position data will not be deleted .
. When the button “ 1 ” or “ 2 ” is pressed within 45 seconds after the
driver ’ s door is opened , the registered memory position can be retrieved even if the ignition switch is in the “ OFF ” position .
. If buttons “ 1 ” and “ 2 ” are pressed at the same time , execution of seat position retrieval may not be possible .
. When the retrieved position is the same as the current seat position , a chirp will sound twice .
! Utilizing of the seat position registered with access key fob
S01AQ060304
1 . Hold the registered access key fob .
2 . Unlock the driver ’ s door by pressing the “ ” button or gripping the door handle .
3 . Open the driver ’ s door .
A chirp sounds and the seat moves to the registered position .
When the select lever is moved to the “ R ” position , the outside mirror will move to the registered reverse tilt-down position .
NOTE
. If the registered seat position cannot be retrieved after performing the previous procedures , try the following procedures . ( 1 ) Press the “ SET ” button on the driver ’ s door .
( 2 ) Press the “ ” button on the access key fob or touch the door lock sensor to lock the doors .
( 3 ) Perform the prior procedures again .
. If the keyless access function is disabled , the seat position cannot be retrieved by gripping the driver ’ s door handle . However , the seat position can still be retrieved by pressing the “ ” button on the access key fob . For information about how to enable / disable the keyless access function , refer to “ Disabling keyless access function ” FP130 .
. If a new position is registered for the same access key fob , the previously registered seat position is deleted .