X-MODE 367 |
||||||
|
& Hill descent control function
S07BI03
The hill descent control function will be in standby mode when X-MODE is activated and the vehicle speed is less than approximately 12 mph( 20 km / h).
The function will operate when the vehicle speed is less than approximately 12 mph( 20 km / h) and the accelerator ratio is less than approximately 10 %.
The function will turn off when the vehicle speed is more than approximately 12 mph( 20 km / h) and the accelerator pedal is depressed.
|
CAUTION
The braking power of the hill descent control function may not be sufficient when strong braking power is needed( e. g., when towing a trailer).
NOTE
. Even while the hill descent control function is operating, you can vary the vehicle speed using the brake pedal or accelerator pedal.
. During braking by the hill descent control function, the stop light will illuminate.
. The hill descent control function is
|
operable regardless of the gradient of the road.
. The hill descent control function may be considered normal when the following conditions occur. – An operating sound is heard briefly from the engine compartment while the hill descent control function is operating.
– The sensation of depressing the brake pedal is different,( harder than usual etc.) when the brake pedal is depressed during hill descent control function operation.
! Hill descent control indicator
S07BI0301
This indicator appears while the hill descent control function is in the standby
|
mode. It flashes while the function is operating. It will disappear when the function is in the disabled mode. When this function is changed from operational to non-operational, it will disappear when the vehicle speed reaches more than approximately 18 mph( 30 km / h). |
Starting and operating |