260
Mirrors
! Compass calibration
S03AP110703
If the compass appears inaccurate, recalibrate the compass.
1. Select“ CALIBRATE” using the right button.
2. To start the compass calibration, press the center button.
3. Select“ Continue” using the center button.
4. Select your current location in the display using the left button.
5. Select“ Continue” using the center button.
6. Once“ C” appears in the display, slowly drive the vehicle in circles until compass is calibrated.
! HomeLink ® Wireless Control System
S03AP1108
The HomeLink ® Wireless Control System provides a convenient way to replace up to three hand-held radio-frequency remotes used to activate devices such as gate operators, garage door openers, entry door locks, security systems, and even home lighting. The below steps are generic programming instructions; for Genie and Sommer garage door openers, please go directly to the HomeLink website. Additional information and programming videos can be found at www. HomeLink. com / Subaru and www. youtube. com / HomeLinkGentex.
CAUTION
. Before programming HomeLink to a garage door opener or gate operator, make sure that people and objects are out of the way of the device to prevent potential harm or damage.
. When programming a garage door opener, it is advised to park outside of the garage.
. Do not use HomeLink with any garage door opener that lacks safety stop and reverse features, as required by U. S. federal safety standards( this includes any garage door opener model manufactured before April 1, 1982). A garage door that cannot detect an object signaling the door to stop and reverse does not meet current U. S. federal safety standards.
. It is also recommended that a new battery be placed in the handheld remote( garage door opener