|
! Programming a New HomeLink Button
S03AP070409
|
||||||||
|
1 Indicator Light 2 HomeLink Buttons
1. Press and release the HomeLink button that you would like to program. The HomeLink indicator light will flash orange slowly( if not, refer to“ Erasing HomeLink Buttons” FP249).
|
1 Garage door opener remote
2. Position the hand-held remote( garage door opener remote) 1 to 3 in( 2 to 8 cm) away from the HomeLink button that you would like to program.
NOTE
Some hand-held remotes( garage door opener remotes) may actually train better at a distance of 6 to 12 in( 15 to 30 cm). Keep this in mind if you have difficulty with the programming process.
|
3. While the HomeLink indicator light is flashing orange, press and hold the hand-held remote button. Continue pressing the hand-held remote button until the HomeLink indicator light changes from orange to green. You may now release the hand-held remote button.
NOTE
Some devices may require you to replace this“ Programming a New HomeLink Button” step 3 with procedures noted in the“ Gate Operator / Canadian Programming” section. Refer to“ Gate Operator / Canadian Programming” FP249.
|
Instruments and controls |
|||||
– CONTINUED – |