230
Light control switch
ker lights, rear side marker lights, tail lights and license plate lights are automatically on or off depending on the level of the ambient light.
NOTE
The light sensitivity of the auto on / off headlights can be changed by operating the center information display. For details, refer to“ Car settings” FP213. Also, the setting can be changed by a SUBARU dealer. Consult your SUBARU dealer for details.
. If the light control switch is in the“ AUTO” position and the headlights do not turn on when it becomes dark outside, turn the light switch to the“” position.
. Auto-on / off wiper-linked headlights
While the light control switch is in the“ AUTO” position, the headlights will automatically turn on when the windshield wipers operate several times. The headlights will automatically turn off when the wipers stop.
NOTE
The ON / OFF setting of this function can be changed by a SUBARU dealer. Consult your SUBARU dealer for details.
“” position( except for Canada models):
The headlights are all off.
Only when the following conditions are fulfilled, instrument panel illumination, headlights, parking lights, front side marker lights, rear side marker lights, tail lights and license plate lights are automatically on or off depending on the level of the ambient light.
. The engine is running.. The parking brake is fully released.
. The select lever is in a position other than the“ P” position.
“ OFF” position( for Canada models): The headlights are all off.* 1 * 2 * 1: When the light switch is switched to the“ OFF” position while the vehicle is stopped, the lights turn off. Then the light switch will automatically return to the“ AUTO” position.
* 2: The headlights will automatically change to the AUTO mode when the following conditions are met:
. The engine is running.
. The parking brake is fully released.
. The select lever is in a position other than the“ P” position.
! Welcome lighting function
S03AH0103
The welcome lighting function turns on the low beam headlight for smooth approaching to or exiting from the vehicle at night or in a dark place.
The function is activated while all of the following conditions are met.
. The light control switch is in the“ AUTO” position.
. It is dark enough to turn on the auto on / off headlights.
NOTE
If the engine is turned off after turning off the light switch, the welcome lighting function may not operate( for Canada models).
When approaching:
While the welcome lighting function is activated, the low beam headlights will automatically illuminate when unlocking all doors including the rear gate by using the remote keyless entry system.
The low beam headlights will remain illuminated for 30 seconds * 1 and then turn off. However, if any of the following operations is done, the low beam headlights will turn off.
. The doors are locked.
. The light control switch is turned to a position other than“ AUTO”.
. The ignition switch is turned to the“ ON”