220
Center information display( CID)
NOTE
A maximum of 5 birthdays can be stored.
! Anniversary List
S03BS051104
The procedure for setting an anniversary is the same as“ Birthday List” FP219, except that in step 4“ Anniversary List” is selected.
! Driver Monitoring System( if equipped)
S03BS051105
The Driver Monitoring System settings can be changed.
For setting method for the following menu on the Driver Monitoring System, refer to“ ON / OFF setting” FP218.
. Driver Monitoring System. User Recognition. Auto Retract Seat on Entry
Repeat Facial Scan: 1. Touch( HOME). 2.?( Settings) 3.?“ Car” 4.?“ Driver Monitoring System” 5.?“ Repeat Facial Scan”
6.?“ OK”
7. While seated in the driver’ s seat, face forward and wait for a few moments. When the scan is completed, the completion screen is displayed on the center information display.
Register User:
1. Adjust the seat position, outside mirror angle, and reverse tilt-down outside mirror angle so that you are seated in the correct driving posture.
NOTE
. Start the user registration after adjusting the seat position, outside mirror angle, and reverse tilt-down outside mirror angle. If they are adjusted during user registration, it may be disrupted. Refer to“ Power seat” FP36 or“ Outside mirrors” FP268.
. If the ignition switch is turned to the“ OFF” position before user registration is complete, the information of the adjusted seat position, outside mirror angles, and reverse tilt-down outside mirror angle will not be saved.
2. Touch( HOME). 3.?( Settings) 4.?“ Car” 5.?“ Driver Monitoring System” 6.?“ Register User”