200
Center information display( CID)
Interruption screen 200 Vehicle status and maintenance information
202
Vehicle settings 208 Climate control operations
208
Surround View Monitor( if equipped)/ Rear 317 / 325 view camera
Refer to the navigation / audio Owner’ s
Navigation system
Manual. Refer to the navigation / audio Owner’ s
Audio / telephone
Manual. Refer to the Owner’ s Manual supplement
EyeSight for the EyeSight system.
The center information display can also be used to set and initialize the center information display itself.
NOTE
. When the vehicle is in motion, certain functions and selections may not be available.
. The language and units for both the center information display and the combination meter display( color LCD) can be changed. For details about language settings, refer to“ General settings” FP208. For details about unit settings, refer to“ Car settings” FP213.
. The images displayed in this Owner’ s Manual are sample images. The actual image may vary depending on the region and vehicle specifications.
& Welcome screen
S03BS02
Welcome screen and good-bye screen are motion graphic displayed on the combination meter display and center information display upon entering and exiting the vehicle.
When the driver’ s door is opened and closed, the welcome screen will appear for a short time.
NOTE
. The welcome screen will disappear when the ignition switch is turned to the“ ON” position while the welcome screen is shown.
. The welcome screen can be turned on or off. For details, refer to“ General settings” FP208.
. For a certain period of time after the welcome screen has once appeared, it may not appear again even when the driver’ s door is opened and closed. This does not indicate a malfunction.
& Good-bye screen
S03BS08
The good-bye screen will be displayed under the following conditions.
. The driver’ s door is opened after the ignition switch is put in the“ OFF” position.
. 3 minutes have passed after the ignition switch is put in the“ OFF” position with the driver’ s door closed.
. 10 minutes have passed when the hands-free phone is used after the ignition switch is put in the“ OFF” position.
. The battery voltage is low when the ignition switch is put in the“ OFF” position.
& Interruption screen
S03BS03
Useful messages, such as reminders, weather information( if equipped) and traffic information( if equipped) may interrupt the current screen and appear on the display accompanied by a beep. Take the proper action according to the message.