Warning and indicator lights 185
Inside warning chime
Ding, ding...( intermittent)
Ding
—
—
Ding
Ding, ding...( 7 seconds)
Outside warning chime
Operation indicator on push-button ignition switch
——
Short beep( 2 seconds)
Short beep( 2 seconds)
Beep, beep, beep, beep, beep( 5 times)
Long beep( 60 seconds max.)
—
—
—
—
——
Status
The driver’ s door was opened while the push-button ignition switch is“ ACC”( when the select lever is in the“ P” position).
The push-button ignition switch was switched to“ OFF” while the driver’ s door is open.
Lockout warning: An attempt was made to lock all doors using the power door locking switch or access key fob while the access key fob is left inside the vehicle. For details, refer to
“ Key lock-in prevention function” FP141.
Access key fob lock-in warning: The door lock sensor was touched while the push-button ignition switch is“ OFF” and the access key fob is inside the vehicle.
Door ajar warning: The door lock sensor is touched while the ignition switch is in the“ OFF” position and one of the doors including the rear gate is opened.
Power warning: The door lock sensor was touched while carrying the access key fob, the pushbutton ignition switch is in a position other than“ OFF”( when the select lever is in the“ P” position).
Access key warning: The vehicle was driven while the access key fob is not inside the vehicle.
Action
Switch the push-button ignition switch to“ OFF”, or close the driver’ s door. When exiting the vehicle, be sure to switch the push-button ignition switch to“ OFF”.
Close the driver’ s door.
Take out the access key fob from the vehicle, and lock the doors. The doors cannot be locked while the access key fob is inside the vehicle. A chirp sound will be heard, and all doors will be unlocked.
Take out the access key fob from the vehicle, and lock the doors. If the access key fob is inside the vehicle, the doors cannot be locked.
Close the doors securely and lock them. If one of the doors including the rear gate is opened, the doors cannot be locked.
Return the access key fob inside the vehicle, or switch the push-button ignition switch to“ OFF”. If the push-button ignition switch is not switched to“ OFF”, the doors cannot be locked.
Carry the access key fob, and drive the vehicle.
– CONTINUED –
Instruments and controls