150
Rear gate
. Be careful not to hit your head or face on the rear gate when opening or closing the rear gate and when loading or unloading cargo.
& Power rear gate
S02AJ01
The rear gate can be locked and unlocked using any of the following systems.
. Power door locking switch: Refer to“ Locking and unlocking from the inside” FP139.
. Keyless access with the push-button start system: Refer to“ Keyless access with push-button start system” FP120.
. Remote keyless entry system: Refer to“ Remote keyless entry system” FP136.
. Automatic door locking / unlocking: Refer to“ Automatic door locking / unlocking” FP140.
The power rear gate operates only when all of the following conditions are satisfied.
. The vehicle is stopped completely.
. The outside temperature is within a range of −228F to 1408F( from −308C to 608C).
. The ignition switch is in the“ OFF” or“ ACC” position. Or, the ignition switch is in the“ ON” position and the select lever is in the“ P” position.
We recommend using the power rear gate function in most circumstances instead of manual operation.
NOTE
. Avoid keeping the rear gate open for more than a few hours. Doing so may drain the vehicle battery.
. If the rear gate cannot be opened due to a discharged vehicle battery, a malfunction in the door locking / unlocking system or other causes, the rear gate can be unlocked by manually operating the rear gate lock release lever. For the procedure, refer to“ Rear gate – if the rear gate cannot be opened” FP462.
. Do not press the power rear gate button repeatedly while the power rear gate is operating. Otherwise, the system may ignore the button operation in order to avoid being damaged.
. If the vehicle starts to move while the power rear gate is operating, the system sounds a buzzer and closes the rear gate automatically. If the system then detects that the rear gate is jammed, it will deactivate the power rear gate function and the rear gate will stop closing. If this occurs, stop the vehicle in a safe place and close the power rear gate by pressing the power rear gate button. For details, refer to“ By the buttons on the rear gate” FP152.
. If you try to open the rear gate using the power rear gate function immediately after closing the rear gate using the power rear gate function, an electronic chirp will sound and the rear gate will not open. Wait for a while before trying to open the rear gate via the power rear gate function.
. If either of the operating conditions has not been satisfied while operating the power rear gate, an electronic chirp will sound and the power rear gate will be deactivated. In this case, the rear gate may stop opening or closing suddenly.
! Operation
S02AJ0111
NOTE
. The rear gate will remain unlocked even after closing it. Always lock the rear gate when leaving the vehicle.
. If you cannot open / close the rear gate by performing the operation described as follows, a short electronic chirp will sound three times( beep, beep, beep).