Door locks 141 |
||||||||
|
automatic door unlocking will not operate.
. When getting out of the vehicle from a rear door, make sure to unlock all the doors by pushing the unlock side of the power door locking switch. If a rear door is unlocked from the inside door lever then the door is opened and closed, the Key lock-in prevention function will be triggered. All doors will be unlocked, the Key lock-in prevention warning indicator“” will appear and the warning chime will also sound.
. If the system detects a strong enough impact to deploy the airbags, all doors will automatically unlocked. For further details, refer to“ Automatic door locking / unlocking operation when involved in an accident” FP465.
|
& Key lock-in prevention function
S02AC06
All the doors will not lock when the door lock switch is pushed with the front door open while the ignition switch is in the“ ACC” or“ ON” position.
|
NOTE
. When leaving the vehicle, make sure you are holding the key before locking the doors.
. The factory setting( default setting) for this function is set as“ operational”. This function’ s operational / non-operational setting can be changed by a SUBARU dealer. Contact a SUBARU dealer for details.
. When getting out of the vehicle from a rear door, make sure to unlock all the doors by pushing the unlock side of the power door locking switch. If a rear door is unlocked from the inside door lever then the door is opened and closed, the Key lock-in prevention function will be triggered. All doors will be unlocked, the Key lock-in prevention warning indicator“” will appear and the warning chime will also sound.
|
! Non-operation of key lock-in prevention function
S02AC0602
When the system is set so that it does not operate, the doors are locked by the following operation.
. When the lock lever is turned to the front(“ LOCK”) position with the driver’ s door open and the driver’ s door is then closed with the lock lever in that
|
position, the driver’ s door will be locked.
. When the spare key is used to lock the driver’ s door from the outside of the vehicle, the door will be locked.
& Battery drainage reduction function
S02AC03
Under various conditions, lights inside the vehicle will automatically turn off to reduce the risk of discharging the battery.
! Battery drainage reduction function for various conditions
S02AC0302
This function will enter standby mode when the ignition switch is turned to the“ OFF” position.
If the following actions are not performed within 10 minutes, while the function is in standby mode, any room lights that are on will automatically turn off.
|
Keys and doors |
|||
– CONTINUED – |