Remote keyless entry system 137 |
|||
|
nic chirp will sound once and the hazard warning flashers will flash once.
If any of the doors( or the rear gate) are not fully closed, the following will occur to alert you that the doors( or the rear gate) are not properly closed.
. An electronic chirp sounds five times.
. The hazard warning flashers flash five times.
When you close the door, it will automatically lock and then the following will occur.
. An electronic chirp sounds once.
. The hazard warning flashers flash once.
& Unlocking the doors
S02AE02
Press the unlock / disarm button to unlock the driver’ s door and the fuel filler lid. An electronic chirp will sound twice and the hazard warning flashers will flash twice. To unlock all doors, the rear gate, briefly press the unlock / disarm button a second time within 5 seconds.
NOTE
If the interval between the first and second presses of the unlock / disarm button( for unlocking of all of the doors and the rear gate) is extremely short, the system may not respond.
|
& Unlocking the rear gate
S02AE03
Press the rear gate unlock button to unlock the rear gate.
An electronic chirp will sound twice and the hazard warning flashers will flash twice.
& Selecting hazard warning flasher operation
S02AE26
Using the hazard warning flasher, the system will give you a visible signal when the doors are locked or unlocked. If desired, you can turn the hazard warning flashers off by operating the center information display. For details, refer to“ Car settings” FP213. The setting can also be changed by a SUBARU dealer. Consult your SUBARU dealer for details.
& Vehicle finder function
S02AE05
Use this function to find your vehicle parked among many vehicles in a large parking lot. Provided you are within 30 feet( 10 meters) of the vehicle, pressing the lock / arm button three times in a 5-second period will cause your vehicle’ s horn to sound once and its hazard warning flashers to flash three times.
NOTE
If the interval between presses is too short when you press the lock / arm
|
button three times, the system may not respond to the signals from the remote transmitter.
& Sounding a panic alarm
S02AE06
To activate the alarm, press the“ PANIC” button once.
The horn will sound and the hazard warning flashers will flash.
To deactivate the panic alarm, press any button on the remote transmitter. Unless a button on the remote transmitter is pressed, the alarm will be deactivated after approximately 30 seconds.
& Setting audible signal operation
S02AE07
Using an electronic chirp, the system will give you an audible signal when the doors lock and unlock.
If desired, you can turn the audible signal off by operating the center information display. For details, refer to“ Car settings” FP213. Furthermore, the volume setting of the audible signal can also be changed by a SUBARU dealer. Consult your SUBARU dealer for details.
|
Keys and doors |
– CONTINUED – |