|
! Enabling functions
S02AP0702
When the procedure to disable the functions is performed again, a chirp will sound, and the functions are enabled.
NOTE
. The keyless access function will be enabled only if you perform the procedure in the same manner used to disable the function( for example, when disabling by operating the driver’ s door, the function will not be enabled even if you operate the access key fob).
. Press the push-button ignition switch if you do not know the procedure in which the keyless access function was disabled. – When disabling by operating the driver’ s door: A chirp will not sound.
– When disabling by operating the access key fob: A chirp will sound.
& Selecting audible signal operation
S02AP12
Using an electronic chirp, the system will give you an audible signal when the doors are locked or unlocked. If desired, you can turn the audible signal off by operating the center information display. For details,
|
refer to“ Car settings” FP213.
Furthermore, the volume setting of the audible signal can also be changed by a SUBARU dealer. Consult your SUBARU dealer for details.
& Selecting hazard warning flasher operation
S02AP18
Using the hazard warning flasher, the system will give you a visible signal when the doors are locked or unlocked. If desired, you can turn the hazard warning flashers off by operating the center information display. For details, refer to“ Car settings” FP213. The setting can also be changed by a SUBARU dealer. Consult your SUBARU dealer for details.
& Warning chimes and warning indicator
S02AP06
The keyless access with push-button start system sounds a warning chime and flashes the access key warning indicator on the combination meter in order to minimize improper operations and help protect your vehicle from theft.
For details, refer to“ Warning chimes and warning indicator of the keyless access with push-button start system” FP183.
|
& When access key fob does not operate properly
S02AP08
Refer to“ Access key fob – if access key fob does not operate properly” FP460.
|
& Replacing battery of access key fob
S02AP09
Refer to“ Replacing battery of access key fob” FP512.
& Replacing access key fob
S02AP13
Access key fobs can be replaced by a SUBARU dealer. For more details, contact a SUBARU dealer.
& Certification for keyless access with push-button start system
. U. S.-spec. models
FCC ID: HYQ14AKB FCC ID: Y8PSU19S-3 FCC ID: Y8PSSPIMB02
CAUTION
S02AP14
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void
|
Keys and doors |
– CONTINUED – |