OTHER SETTINGS
DOWNLOAD UPDATE Updated software will be downloaded automatically .
When download is completed , a message asking if installation is desired or not will be displayed . ( �P . 72 )
UPDATE INSTALLATION
CAUTION
� Park your vehicle in a safe place when installing the update .
� The following system functions are restricted during the update installation .
�� It will not be possible to use general system functions .
�� Only the rear view camera image will be displayed . Or the image will disappear temporarily .
2 . |
When installation is complete , select |
OK ( OK ) on the |
|
confirmation message . |
|
� If the update procedure fails , refer to the “ TROUBLESHOOTING ” section . ( �P . 209 )
3 . Turn the ignition switch to the “ LOCK ”/“ OFF ” position and exit the vehicle .
4 . Close the driver ’ s door and lock the doors , then move at least 10 feet ( 3 m ) away from the vehicle to prevent the key from interfering .
5 . After at least 5 minutes have elapsed , start the engine again . � The new software will be applied .
1 . When a message asking if installation is desired or not is displayed , select Yes ( Yes ).
NOTE
� Installation will take several minutes .
� Remind Me Later ( Remind Me Later ): Select to extend the installation timing by up to twice .
� During software update installation , the screen may flicker . However , this is not a malfunction .
72