Bluetooth ® SETTINGS
CONNECTING MANUALLY
When the auto connection has failed , it is necessary to connect Bluetooth phones / devices manually .
Follow the “ CONNECTING OR DISCONNECTING Bluetooth PHONE / DEVICE ”. ( �P . 60 )
RECONNECTING THE Bluetooth PHONE / DEVICE
If a Bluetooth phone / device is disconnected due to poor reception from the Bluetooth network when the ignition switch is turned to the “ ACC ” or “ ON ” position , the system automatically reconnects the Bluetooth phone / device .
� If a Bluetooth phone / device is disconnected on purpose , such as turning it off , this does not happen . Reconnect the Bluetooth phone / device manually .
DELETING Bluetooth PHONES / DEVICES
1 . |
Select |
. |
2 . |
Select Delete ( Delete ). |
3 . |
Select |
for the Bluetooth phone / device you wish to |
|
delete . |
|
4 . |
Select OK ( OK ) when the confirmation message appears . |
NOTE
� The Bluetooth phone / device will still contain information from this system even after the Bluetooth phone / device has been deleted . Operate the Bluetooth phone / device to delete the system information saved inside the Bluetooth phone / device .
NOTE
� When a Bluetooth phone / device is registered to the profile of a driver , a message may be displayed asking if the change of profile to the driver is desired . ( �P . 65 )
62