WHAT TO DO IF
MAP UPDATE ( IF EQUIPPED )
If a problem occurs when attempting to perform a map update , refer to the following table . �Errors when updating via USB
Error code Cause Solution
“ Installation Failed ( 1 )”
“ Installation Failed ( 2 )”
“ Installation Failed ( 5 )”
“ Installation Failed ( X )”
Reading of the data on the USB memory device failed .
Corruption of the data on the USB memory device was detected .
An error in the system data was detected while performing the update .
An unspecified error has occurred .
Disconnect and then reconnect the USB memory device , check that it is connected correctly , and attempt to perform the update again .
Attempt to perform the update again . If the same error is detected , download the map update data again , copy it to a different USB memory device and attempt to perform the update again .
Attempt to perform the update again . If the same error is detected , download the map update data again , copy it to a different USB memory device and attempt to perform the update again .
Attempt to perform the update again . If the same error is detected , contact your SUBARU dealer .
210