Subaru Ascent Manuals 2025 Ascent EyeSight Driving Assist Manual | Page 176

Conventional Cruise Control
2 . Switch to Conventional Cruise Control . Press and hold the / ( Following distance setting ) switch for approximately 2 seconds or longer to switch from Adaptive Cruise Control to Conventional Cruise Control . A notification sounds 1 short beep . At this time , the following distance setting indicator on the combination meter display turns off and ( Conventional Cruise Control indicator ) ( white ) is displayed .
( 1 )
H00542
H02072
( 1 ) Conventional Cruise Control indicator ( white )
To set the ready status :
When all of the following conditions are
met ,
( READY indicator ) is displayed
on the combination meter display , and
Conventional Cruise Control can be activated
.
-
All doors ( except the rear gate ) are
closed .
-
The driver ’ s seatbelt is fastened .
-
The electronic parking brake is not applied . The electronic parking brake indicator light is off .
( 1 )
-
The select lever is in the “ D ” or “ M ” position .
( 1 ) READY indicator
-
The brake pedal is not depressed .
-
The road is not a steep slope .
-
The steering wheel has not been turned significantly in either direction .
H02073
174