Start / Stop engine
Push-button ignition switch ( if equipped )
Operation indicator
To start engine :
STEP1 : Carry the access key fob , and sit in the driver ’ s seat .
STEP2 : Apply the parking brake . STEP3 : Shift the select lever into the P position .
STEP4 : Depress the brake pedal until the indicator on the push-button ignition switch turns green .
STEP5 : While depressing the brake pedal , press the push-button ignition switch .
To stop engine : STEP1 : Stop the vehicle completely . STEP2 : Move the select lever to the P position . STEP3 : Press the push-button ignition switch .
Change of the power supply ( Without starting engine )
Every time the button is pressed without depressing the brake pedal , the power is switched in the sequence of OFF➞ACC➞ON➞OFF .
OFF ( Turned off ) ACC ( Orange ) ON ( Orange )
Ignition switch ( if equipped )
Electronic parking brake switch
Release
Apply
The key can be turned from ACC to LOCK only when the key is pushed in while turning it and the select lever is in the P position .
P
6
◆ Some functions are available on certain models . ◆ For detailed operating and safety information , please refer to your Owner ’ s Manual .