142
Door locks
& Automatic door locking / unlocking
S02AC08
All doors , the rear gate and the fuel filler lid are automatically locked or unlocked under the following conditions .
. For automatic door locking
– When the vehicle speed reaches 12 mph ( 20 km / h ) or higher ( factory default setting ).
– When the select lever is shifted into a position other than the “ P ” position .
. For automatic door unlocking – When the driver ’ s door is open
( factory default setting ). – When the ignition switch is turned to the “ OFF ” position . – When the select lever is shifted into the “ P ” position .
NOTE
. The automatic door lock and unlock setting can be changed with the center information display . Refer to “ Car settings ” FP218 .
. When locking the door by operating the power door locking switches , automatic door locking will not operate .
. When unlocking the door by operating the power door locking switches , automatic door unlocking will not operate .
. When getting out of the vehicle from a rear door , make sure to unlock all the doors by pushing the unlock side of the power door locking switch . If a rear door is unlocked from the inside door lever then the door is opened and closed , the Key lock-in prevention function will be triggered . All doors will be unlocked , the Key lock-in prevention warning indicator “ ” will appear and the warning chime will also sound .
. If the system detects a strong enough impact to deploy the airbags , all doors will automatically unlocked . For further details , refer to “ Automatic door locking / unlocking operation when involved in an accident ” FP475 .
& Key lock-in prevention function
S02AC06
Under the following conditions , all the doors will not lock when the door lock switch is pushed with the front door open .
. The key is still in the ignition switch ( models without “ keyless access with push-button start system ”).
. The ignition switch is in the “ ACC ” or “ ON ” position ( models with “ keyless access with push-button start system ”).
NOTE
. When leaving the vehicle , make sure you are holding the key before locking the doors .
. The factory setting ( default setting ) for this function is set as “ operational ”. This function ’ s operational / non-operational setting can be changed by a SUBARU dealer . Contact a SUBARU dealer for details .
. When getting out of the vehicle from a rear door , make sure to unlock all the doors by pushing the unlock side of the power door locking switch . If a rear door is unlocked from the inside door lever then the door is opened and closed , the Key lock-in prevention function will be triggered . All doors will be unlocked , the Key lock-in prevention warning indicator “ ” will appear and the warning chime will also sound .
! Non-operation of key lock-in prevention function
S02AC0602
When the system is set so that it does not operate , the doors are locked by the following operation .