OTHER SETTINGS
2 . |
When installation is complete , select |
OK ( OK ) on the |
|
confirmation message . |
|
� If the update procedure fails , refer to the “ TROUBLESHOOTING ” section . ( �P . 210 )
3 . Turn the ignition switch to the “ LOCK ”/“ OFF ” position and exit the vehicle .
4 . Close the driver ’ s door and lock the doors , then move at least 10 feet ( 3 m ) away from the vehicle to prevent the key from interfering .
5 . After at least 5 minutes have elapsed , start the engine again . � The new software will be applied .
SOUND SET
1 . |
Select |
2 . |
Select Settin |
3 . |
� Sound ( S |
4 . |
Select the item |
70